DÖRR CV02 Stereo Video Directional Condenser Microphone
User Manual
Thank you for the purchase of the DÖRR CV02 condenser microphone. The microphone is especially designed for the
use with a camera. The microphone can be combined with cameras and camcorders of all brands. It can simply on
the camera. Please read this manual carefully before using the microphone to make sure the correct operation and to
exert the optimum functions.
Name of Parts and their Function
1. Stereo Condenser Microphone
2. Battery Compartment for 9V Battery
3. Rugged Aluminum Housing
4. PAD Switch Level - 10 dB
5. On/Off Switch
6. 3,5mm Connector Socket
7. 2 Steps High Pass Filter switch (reduces
disturbing side noise of low frequency)
8. Shock Mount
9. Mounting Foot
Specifications
Type
Frequency Range
Stereo
Sensitivity
S/N (signal to noise ratio)
Output Impedance
PAD Level Switch for Sound Attenuation
High Pass Filter
Output Socket
Power Source
Measurements
Weight (w/o battery)
Frequency Range
Usage of the Microphone
• Unscrew the housing in clockwise direction. Insert the 9V battery and make sure to respect the polarity
• Fix the shock mount at the microphone body. Slide the microphone through the inner opening of the shock mount,
pressing the rubber straps outward
• Now mount the microphone with the mounting foot to your camera or tripod
• Connect the microphone's output socket with the camera's audio input socket using the supplied cable
• Now use the ON/Off switch the microphone to turn the microphone one. T he green LED confirms that the microphone is on
DÖRR GmbH
Postfach 128 • 89202 Neu-Ulm/Germany
Fon +49 731 97037-0 • Fax +49 731 97037-37
info@doerrfoto.de • www.doerrfoto.de
Related specifications and configuration are subject to change without notice.
➀
Directional Stereo Condenser Microphone L/R
30Hz to 20kHz
2 Channels right/left
app. -33dB re 1V/Pa @ 1kHz
76 dB
200 Ohm
Level - 10 dB
80Hz
3,5mm Stereo
9V battery (not included)
165x78x60mm
app. 191g
➇
➈
➂
Polar Response
GB
➁
➄
➃
➆
➅
www.doerrfoto.de