Maintenance And Care - Levenhuk 2L NG Manual Del Usuario

The 40x objective is equipped with a spring casing, which protects the frontal lens from contacting the
specimen during the focus adjusting.
The digital camera was exclusively designed for use with this microscope.
The object image can be transferred to your PC display in its actual colors and stored in the PC memory.
ScopePhoto software is included in the package; it allows viewing and editing of the received images. Sup-
ported file formats: *.bmp, *.jpg, *.jpeg, *.png, *.tif, *.tiff, *.gif, *.psd, *.ico, *.emf, etc.
The USB cable is used as camera power supply and for connection with PC.
Compatible OS: Windows 2000/XP/2003/Vista.
•
The microscope is designed for use in macroclimatic conditions with temperate or frigid climate, in the
laboratories at temperatures from 10 to 35 °C and the relative air humidity up to 80% at 25 °C.
•
The room should be free from dust, acid or alkali vapors, evaporations of other active substances.
•
The microscope should be used in the room protected from shocks or vibrations.
•
High temperatures and humidity may cause formation of mold or moisture condensation on the optical
and mechanical parts of the microscope, which can negatively affect its operation.
•
When not in use the microscope should be covered with a special case.
•
Metallic parts should be kept clean. Special attention should be paid to maintaining cleanliness of the
optics (especially objectives and eyepieces).
•
To maintain the microscope, regularly remove dust off it, then clean it with a special Levenhuk® cleaning
cloth slightly moistened with Levenhuk® cleaning spray, and afterwards wipe it with a dry soft clean
tissue or cloth.
•
When dust is on the objective lens, which is deep in the casing, carefully wipe the lens with a clean Q-tip
slightly moistened with ether or spirits mixture.
•
If you noticed dust inside the objective or film on the inside of the lenses, you should send the objective
for repair.
•
The noncontact Levenhuk® compressed air duster for optics ensures the best cleaning results; it re-
moves dust and dirt with air blast.
•
•It is prohibited to disassemble objectives and eyepieces.
•
Never look at the sources of bright light or laser through the microscope: it will cause DAMAGE
TO YOUR EYES!
•
Do not disassemble the microscope or camera on your own.
•
Keep the microscope and camera away from condensation; do not use them in rainy weather.
•
Keep the microscope away from shock or excessive pressure.
•
Do not overtighten the locking screws.
•
Keep the microscope and camera away from hostile environment, home and car heaters, incan-
descent lamps or open flame.
•
When cleaning any optical surfaces, first blow dust or loose particles off the surface or wipe them
off with a soft brush. Then wipe the lens with a soft clean tissue slightly moistened with spirits or
ether.
•
Never touch the optical surfaces with your fingers.
www.levenhuk.com

Maintenance and care

Camera