English
The microscope is safe for health, life and property of the consumer and the environment when properly
used; the microscope meets the requirements of international standards. The microscope is designed for
observing transparent objects in the transmitted and reflected light using the bright field method, for
biological use and teaching demonstrations.
Levenhuk DEM 130 digital camera was exclusively designed for use with this microscope. It allows transfer
of the precise image of the observed object to your PC display. ScopePhoto software is included in the
package; it allows viewing and editing of the received images.
Linear field in the images space
Illumination (upper/lower light)
Speed (depends on the PC model)
1
2
Eyepiece
Monocular nosepiece
8
illumination
Base stand
13
14
USB port
Digital camera
www.levenhuk.com
Magnification
Magnification of objective
Eyepiece magnification
Tube length
Stage dimensions
Stage moving range
Power supply
Camera model
MAX resolution (at rest)
Megapixels
Pixel size
Sensitivity, v/lux-sec @550 nm
Video recording
Active range
Location
Image format
Field of view diameter
Spectral range
Programmable options
System requirements
Software
Power supply
Temperature range
3
Revolving head
9
10
Stand
Upper illumination
15
USB cable
64х-640х
4x, 10x, 40x
16х
18 mm
160 mm
95х95 mm
0-15 mm
AC adapter
LED
DEM135
640x480
0.3
Sensor
1/4" CMOS
6μm X 6μm
2.0
30 fps
Yes
60dB
ocular tube (not eyepiece)
BMP, TIFF, JPG, PICT, SFTL etc.
18 mm
400-650 nm
Image size, brightness, white balance, exposure
control, etc.
Slot
USB 2.0, 480 Mb/s
Windows 2000/XP(SP2)/2003/Vista; USB port
USB 2.0 driver, ScopePhoto
via USB cable
-30...70 °C
4
Objectives
11
Slide holders
16
17
Adapters
Setup CD
General information
Specification
5
6
Focusing knob
Stage
12
Diaphragm disk
Legend
7
Lower