Hauck Miami Instrucciones Para El Uso página 11

INStRUCtIoN oF USE
Part List
Please check the list of parts to ensure that all parts have been delivered:
Stroller main frame with Seat unit
‧1 handle bar
‧1 canopy
‧1 front bar
‧2 rear wheels
‧2 sets of front wheels
‧1 rear wheel axle
1. UNFOLDING (fig. 1a,1b)
Open the stroller until both side catches are engaged (1a), then install the handle onto the
stroller (1b) make sure the pushpins lock in place.
2. FRONT WHEEL ASSEMBLY (fig. 2a, 2b)
Push both front wheels into position (2a). Make sure the pushpin locks
in place and cannot be pull off. When changing the wheel, lie the stroller
down in fully assembled state. Press the lever on the wheel frame and pull complete double
wheel out (2b).
3. FRONT WHEEL ADJUSTMENT (fig. 3)
Slide the front wheel lever up to lock the swivel movement. to release the swivel movement,
slide the lever down.
4. REAR WHEEL ASSEMBLE (fig. 4a-4c)
Slide the rear wheel axle through the 2 rear legs (4a).
Push the rear wheel onto the rear axle, the wheel is locked when you hear a click sound (4b).
Check the wheels are securely installed before use.
When changing the wheel, press the button and pull the wheel out(4c).
5. BRAKE (fig. 5)
Press the rear brake down by foot to stop the rear wheels and push the stroller to check.
Attention: Always apply both brakes when parking the stroller.
6. ADJUSTING THE BACK REST (fig. 6)
Pull the metal handle at the back of the backrest upwards and adjust
the back rest to the desired position. They back rest can be altered to 3
different positions.
7. ADJUSTING THE LEG REST (fig. 7)
Press both (left & right) buttons to bring the leg rest to the desired
position.
8. INSTALL THE FRONTBAR (fig. 8a, 8b)
Install the front bar by fixing it onto the 2 sides of the catches (8a). Test
the front bar by pulling on it to make sure it is locked into place.
to open the front bar, press the bottom buttons on both sides and pull out
the front bar (8b).
9. REVERSING THE HANDLE (fig. 9a, 9b, 9c)
Pull both plastic catches (left & right) upwards to release the handle
position (9a). Press the 2nd safety lock down (9b) and then swivel the handle to the opposite
direction (9c). Please always check if the handle has engaged in the new position completely.
Both of the double wheels must
be additionally secured with both of the parking brakes when parking the
stroller, if the handle is in the position facing towards the child.
10. BRAKING THE FRONT WHEELS (fig. 10)
The front wheels can be stopped by pressing the front wheel's brakes downward. Release the
front brakes upward, if you want to move
the stroller again.
11.ASSEMBLE THE CANOPY (fig. 11)
Insert the canopy plastic clamps into the housings on the 2 sides of the
seat.
12. FOLDING AWAY (fig. 12a-d)
Make sure the handle is at the canopy side, and the backrest is in the upright position. Fold the
canopy backward. Press the foot lock on the
left side first (12a) then press the 2nd foot lock on the right side (12b)
to release the stroller, and push the handle forward to fold the stroller together (12c). Close the
transportation-lock on the side of the frame (12d).
13. SECURE THE CHILD IN THE SEAT (fig 13):
Place the child in the seat and push the clips on the waist belt into the buckle on the crotch belt
(the one that comes between the child's legs). Adjust the length of the belt to your child's needs.
Always ensure the straps are not twisted or caught on the stroller frame. Check the adjustment
every time you place the child in the seat and when the backrest is reclined. To release the
harness, squeeze & open the buckle.
GB
11