Hauck Miami Instrucciones Para El Uso página 12

Harness adjustment: Insert both fasteners (B) into the buckle (A), ensure that both buttons click
GB
into position. Ensure both shoulder straps (C) are attached to the fasteners (B). Each strap has
its own length adjuster (D). To undo the harness, press the button and pull apart. "D" Rings are
provided for fitment of a full safety harness. The attachment points (D-rings) are located on side
straps.
WARNING: (A child's safety is your responsibility.) The child should be harnessed in at all times
and should never be left unattended. the child should be clear of moving parts while making
adjustments. This stroller requires regular maintenance by the user.
Attention: Avoid serious injury from failing and sliding out, always use seat belt & always use as
instructed. Never use the harness without the shoulder straps.
14. ADJUSTING THE SHOULDER HARNESS (fig. 14)
there are 2 shoulder harness heights available in the stroller, use the slot closest to child's
shoulder height.
15. FASTENING THE SOFT CARRY COT (OPTIONAL ACCESSORY) (FIG. 15)
Do not place any additional mattress in the soft carrycot. The soft carrycot should be securely
fixed by the attached plastic hooks to the D-ring, which are on the stroller seat.
UPkEEP AND MAINtENANCE
In General
Please check the pushchair functions on a regular basis. Make sure that the frame is stable, the
screws are tight, the latching devices are safely locked, the wheels are securely attached and the
brakes are in working order. Check the cover occasionally, making sure that the stitching is still firm,
and inspect the quality of the plastic parts. Any broken or worn working parts should be replaced
immediately. Proceed in the same manner with components that are broken, torn, defect or worn-
out. Please use only original hauck replacement parts.
Do not subject your pushchair to excessive sunshine. This can lead to a fading of textile covers
and plastic parts.
Cleaning the covers
Remove the covers from the frame by loosening the loops, press studs or screws. Please read the
instructions on the sewn-in label before cleaning.
To clean the cover gently, wipe it down evenly using only a damp cloth. As long as there are no
plastic, wood or metal parts on or in the cover, it can be machine-washed at 86°F (30°C) and
medium speed. the cover should be air-dried, but not exposed to excessive sunshine. Please do
not dry the cover in the drier, to avoid shrinking. Do not re-fit the covers until they are completely
dried.
Cleaning the frame
Dry the pushchair with a soft cloth after cleaning or after use rain or snow. Use only mild soapy
water or lukewarm water to clean the frame of your pushchair. Plastic parts can be cleaned with
mild detergent cleaners.
Wheel maintenance
Clean and service the wheels regularly. Apply corrosion or lubricant spray on the rim when
necessary, to protect against rust and deposits. Please make sure in winter that road salt residue
is removed immediately by using warm water and damp cloth. Remove dirt from the wheels and
axles on a regular basis.
12