Publicidad
Idiomas disponibles
Idiomas disponibles
Double DIN radio provision
1. Affix the (2) factory clips to the radio
housing. (Figure A
2. Mount the climate switches to the radio
housing using (6) of the
#8 x 1/2" screws on the upper and
outside mounts. Do not install the
screws on the bottom mounts shared
by the radio brackets until installing the
radio/bracket assembly. (Figure A)
3. Attach the radio to the brackets with
the screws provided by the aftermarket
radio. (Figure B)
KIT ASSEMBLY
(Figure A)
(Figure B)
4. Mount the radio assembly to the radio
housing by installing (4) of the supplied
#8 x 1/2" screws to the shared radio
brackets. (Figure B)
5. Locate the factory wiring harness
and antenna plug in the dash. Metra
recommends using the proper mating
adapters from Metra and AXXESS.
6. Clip the new radio assembly into the
dash and reassemble dash in reverse
order of disassembly.
(Figure C)
REV. 6/21/21 INST99-7807
7
Publicidad
