Axis Air AX-5330 Manual Del Usuario página 15

body, this will typically produce a poor shave and unusual sound.
Do not remove the outer foil from the outer foil unit.
6. Before cleaning the trimming blade, slide the power switch off.
Check that the trimming blade is not moving when cleaning it.
Notes: After cleaning the shaver, apply shaver oil (sold separately) to
A
Flex-Foil
TM
screw
inner
rear
cut-
panel
side
panel
screw
Axis Air |2| english
B
shaver back
hood
inner case
Ni-Mh battery
the outer foil surface once every 3 uses. When the shaver has not
used for a long time, be sure to clean the outer foil, inner blade and
trimming blade, and apply shaver oil to the outer foil surface.
FOR RECYCLING THE Ni-Mh BATTERY
Never disassemble the shaver to remove the Ni-Mh battery except to
dispose of the shaver.
The Ni-Mh battery in your shaver is recyclable. When you dispose of the
shaver, please take care to remove the Ni-Mh battery and recycle it.
How to remove the Ni-Mh battery
> Turn on the power switch, and run the battery down until the in-
ner blade stops moving. If the shaver is disassembled before the
recharged electricity is depleted, it may cause a shock, catch fire
and cause burns.
Axis Air |2| english