Axis Air AX-5330 Manual Del Usuario página 7

RECHARGING YOUR SHAVER
*When recharging your shaver, do not use any other AC adaptor other
than the one included with this package.
First time charging / Recharging after prolonged storage:
Before using your new shaver for the first time or if the shaver has been
in storage for any extended period of time, be sure to recharge the
shaver batteries to their capacity for a full 8 hours before use. Next, use
this full charge until the shaver batteries are completely exhausted. After
this, you can fully recharge your shaver battery in approximately 1 hour.
Regular Recharging
1. Slide the "Slide-and-Lock" power switch to its off position and put
the cap on.
2. Securely insert the power cord of the AC adaptor into the bottom
Axis Air |12| english
socket of the shaver.
* Before connecting the power cord plug from the AC adaptor into the
bottom socket of the shaver, make sure that the socket is completely
dry, to prevent any possible malfunction.
3. Connect the AC adaptor plug into the AC outlet.
* Your shaver will be fully charged in approximately 1 hour, and the
stored power will last approximately
one week if the shaver is used for 3
minutes daily.
* As the reserve power increases
while the shaver is being recharged,
the power reserve indicator LED
will flash, and then one-by-one, the
LEDs will light from the bottom up, indicating that there is a power
reserve stored in the shaver.
Axis Air |13| english