Metra 99-5826CH Instrucciones De Instalación página 11

Touch Screen 99-5826CH
Tools Screens
4. Trigger button
Pressing this button will take you to the Trigger switch screen. Here you will be able to turn
on and off lines 1 through 3. (All outputs are latched)
Wiring of 4-pin Trigger harness (Metra recommends using a relay (part # E-123) on
every output wire.
NOTE: 4-pin harness is to be connected to the rear of the touch screen
1. Yellow wire – Connect to 12-volt accessory
2. Purple wire (line 1) – 12-volt (500mA max) output
3. Brown wire (line 2) – 12-volt (500mA max) output
4. Green wire (line 3) – 12-volt (500mA max) output
11