CONNECTING THE FM ANTENNA
1.
Connect the FM antenna supplied to the FM 75Ω COAXIAL Jack.
2.
Slowly move the antenna wire around until you fi nd a location where reception is good, then
fasten it to a wall or other rigid surface.
Cooling Fan
The cooling fan supplies cool air to the unit to
prevent overheating.
Please observe the following cautions for your safety.
Make sure the unit is well-ventilated. If the unit has poor
•
ventilation, the temperature inside the unit may rise
and may damage it.
Do not obstruct the cooling fan or ventilation holes. (If the
•
cooling fan or ventilation holes are covered with a
newspaper or cloth, heat may build up inside the unit and
fi re may result.)
M
FM Antenna
(supplied)
This unit does not receive AM broadcasts.
21