Setting The Audio - Samsung HE10T Manual Del Usuario

system setup

SETTING THE AUDIO

OSD(On-Screen Display) language is set to English by default.
1. In Stop mode, press the MENU button.
2. Press the Cursor ▼ button to move to Setup and then press the
ENTER or ► button.
3. Select Audio Setup and then press the ENTER or ► button.
4. Press the Cursor ▲,▼ button to select the required item.
5. Press the Cursor ▲,▼ button to select the desired option and then
press the ENTER button.
The option is selected and the screen returns to Audio Setup Menu.
•
d Press the RETURN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
Digital Out :
•
d PCM: Converts to PCM (2CH) audio. Select PCM when using
the Analog Audio Outputs.
d Bitstream: Converts to Dolby Digital Bitstream (5.1CH).Select
Bitstream when using the Digital Audio Output
Dynamic Compression :
•
d On: To select dynamic compression.
d Off: To select the standard range.
PCM Down Sampling:
•
d On: Select this when the amplifi er connected to the player is not 96KHz compatible. In this
case, the 96KHz signals will be down converted to 48KHZ.
d Off: Select this when the amplifier connected to the player is 96KHz compatible. In this case, all
signals will be output with out any changes.
38
.
Language Setup
®
Audio Setup
®
Display Setup
®
Parental Setup :
®
DivX(R) Registration
®
AUDIO SETUP
Digital Out : PCM
Dynamic Compression : On
PCM Down Sampling : On