A 3 Fcc - Phoenix Contact THERMOMARK ROLLMASTER Manual Del Usuario

THERMOMARK ROLLMASTER
Interfaces
Ethernet
WLAN
Interfaz I/O IEC/EN 61131-2
Software
Driver Windows
Software de planificación y marcado
Datos de funcionamiento
Tensión
Consumo de potencia
Temperatura de servicio
Humedad del aire
38 / 42
PHOENIX CONTACT
A 3 FCC
NOTE: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. The equipment generates,
uses, and can radiate radio frequency and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user may be required to correct the interference at his own expense.
LPD, IPv4, IPv 6, impresión Raw IP, DHCP, HTTP, FTP,
SMTP, SNMP, TIME, NTP, Zeroconf, servicio web SOAP
WLAN 802.11b, g, n, Access Point Mode o Station Mode
2,4 GHz
integrada
Windows Vista, Windows 7, Windows 8, Windows 8.1, Win-
dows 10, Server 2003, Server 2008, Server 2008 R2, Server
2012, Server 2012 R2, modo Standalone
CLIP PROJECT advanced / professional
100 V AC ... 240 V AC, 50/60 Hz
máximo 300 W
+10 °C ... +40 °C
10 % ... 85 %, sin condensación
107815_es_00