Troubleshooting - Oregon Scientific RM926 Manual De Usuario

TROUBLESHOOTING

Use this troubleshooting guide to help you remedy any difficulties you may be experiencing while using the product.
Should any problem persist after you have checked these symptoms, consult your nearest Oregon Scientific dealer.
PROBLEM SYMPTOM
Clock time not No radio signal
correctly set. reception.
No alarm. Alarm does
not sound.
LCD is dim or Battery may be
does not running low on
illuminate. power.
Operation not Certain functions Device requires reset.
normal. do not perform
correctly.
CHECK THIS
Electromagnetic interference or
objects are barring reception.
Orientation or placement of unit is not
optimum or out of range for receiving
radio signal.
Alarm is disabled.
appears on the LCD.
10
REMEDY
Place the unit far away from PCs,
phones, and other electronic
equipment and near a windowsill.
Wait for at least 24 hours.
Turn on the alarm setting.
Install new batteries.
Reset the unit with a blunt stylus
pressed against the RESET hole.