Snooze Function / Deactivating The Alarm; Resetting The Unit; Warnings - Oregon Scientific RM926 Manual De Usuario

4. To set alarm 2, repeat steps 2-3.
5. Once alarm 1 and alarm 2 have been set,
both appear on the LCD. Press ALARM to
toggle between and
in clock display mode.
SNOOZE FUNCTION / DEACTIVATING THE
ALARM
1. When the alarm sounds (
SNOOZE/LIGHT to stop the alarm and activate the
8-minute snooze function. The alarm will sound
again after 8 minutes.
2. Press and hold SNOOZE/LIGHT for 2 seconds or
press ALARM to mute the snooze function. The
alarm will automatically be set to sound again at the
same time after 24 hours. The snooze function can
also be disabled by entering any setting mode, if the
second alarm sounds, or pressing . In alarm display
mode, pressing activates / deactivates the alarm
function when the respective alarm 1 or alarm 2 is
selected.
and
to view the alarm times
or will blink), press

RESETTING THE UNIT

You may need to occasionally reset the unit, for example,
if you are travelling to different time-zones, if fresh
batteries have been installed, or if the clock stops
responding. To reset the unit at any time, pull down the
battery compartment cover and insert a blunt stylus into
the RESET hole to reset all values to the unit's original
factory settings.

WARNINGS

To ensure you use your product correctly and safely,
read these warnings and the entire user manual before
using the product. The warnings given here provide
important safety information and should be observed at
all times.
• Do not attempt to repair the product yourself. Contact
the retailer or our customer service department if it
requires servicing.
• Take precautions when handling all battery types.
They can cause injuries, burns, or property damage
as a result of contact with conducting materials, heat,
corrosive materials or explosives. Remove the
batteries before storing the product for long periods
of time.
• The product is a precision instrument. Never attempt
to take this device apart. There is a serious danger of
powerful electric shocks.
• Do not immerse the device in water.
8