Alarm Function; Setting And Activating The Alarm - Oregon Scientific RM926 Manual De Usuario

HOW TO S
NOTE Time-zone hour offset can be adjusted +/- 23
hours. The Zone time is the current clock time based on
the radio reception signal, and local time is equal to the
Zone time plus the Hour Offset.

ALARM FUNCTION

The unit is equipped with dual 2-minute alarms
with 8-minute snooze function. For each alarm you
may select from 5 polyphonic melodies (Circus, Carnival,
Turkish, Jazz and Entertainer) plus a beeping alarm.

SETTING AND ACTIVATING THE ALARM

1. From any clock display mode, press ALARM to view
the alarm time on the lower line of the LCD. The
Month-day / Day-month calendar mode changes to
alarm display mode. "– : – –" appears to indicate that
no alarm time has been set.
2. Press to show the alarm time "6:00" (default
setting) and
seconds until the alarm hour value blinks.
3. Use or to adjust the each of the settings in the
following order: hour, minute, melody, and alarm
volume level (Lo / Hi), pressing ALARM each time to
confirm and go to the next setting.
7
. Press and hold ALARM for 2
and