Carton Contents; Getting Started - SNOWJOE SJ623E Manual De Usuario

Unpacking
Carton Contents:
• Electric snow thrower with middle frame and upper frame
• Upper crank rod
• Lower crank rod
• Chute clean-out tool with 2 clips (assembled)
• Extension cord restraint hook
• Cable clips (2, assembled)
• Handle knobs and bolts (4 sets)
• Manual with registration card
1. Carefully remove the electric snow thrower and check to
see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe + Sun Joe
®
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new electric snow
thrower. The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with
local regulations or save the packaging for long-term
product storage.
IMPORTANT! The equipment and packaging material are
not toys. Do not let children play with plastic bags, foils,
or small parts. These items can be swallowed and pose a
suffocation risk!
Assembly
m
CAUTION
Inspect wiring, which, if damaged during shipping,
may cause serious bodily injury during equipment use.
If any damage is seen or suspected, do not assemble.
Instead, contact the Snow Joe
service center at 1-866-SNOWJOE (1-866-766-9563)
for assistance.
Handle with care during assembly so that electrical
wiring does not become damaged.

Getting Started

1. Remove the snow thrower and all other items from
the box.
2. Determine the left and right hand side of the snow thrower
by standing in the normal operating position.
customer service center at
®
m
+ Sun Joe customer
® ®
3. Check all items for shipping damage. If damage is found
or suspected or if any of the parts are missing, do not
assemble. Instead, promptly inform the dealer where you
bought the snow thrower or contact the Snow Joe
Sun Joe customer service center at 1-866-SNOWJOE
®
(1-866-766-9563) for assistance.
4. Check to make sure the upper chute crank is included.
Upper, Middle + Lower Frame Assembly
1. For easy assembly, the unit comes complete with
most parts already connected. To complete the handle
assembly, simply pull the middle frame back and pull the
upper frame up (Fig. 1).
Fig. 1
2. Secure the connection of the lower frame to the middle
frame by fastening the first set of joint fixing T-bolts and
knobs on each side (Fig. 2).
Fig. 2
3. Secure the connection of the middle frame to the upper
frame by fastening the second set of joint fixing T-bolts
and knobs on each side (Fig. 3).
6
+
®