Carton Contents - SNOWJOE SJ624E Manual Del Operador

Unpacking

Carton Contents:

• Electric snow blower
• Handle knobs/deflector knobs (4)
• Square J-bolts (2)
• Carriage bolts (2)
• Rubber washers (2)
• Manual with registration card
1. Carefully remove the electric snow thrower and check to
see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe + Sun Joe
®
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new electric snow
thrower. The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with
local regulations.
IMPORTANT! The equipment and packaging material are
not toys. Do not let children play with plastic bags, foils
or small parts. These items can be swallowed and pose a
suffocation risk!
Assembly
m
CAUTION
Inspect wiring, which, if damaged during shipping,
may cause serious bodily injury during equipment use.
If any damage is seen or suspected, do not assemble.
Instead, contact the Snow Joe
service center at 1-866-SNOWJOE (1-866-766-9563)
for assistance.
Handle with care during assembly so that electrical
wiring does not become damaged.
customer service center at
®
m
+ Sun Joe customer
® ®
Upper, Middle and Lower Frame
Assembly
1. Align the holes in the lower handle section with those in
the handle brackets (Fig. 1).
Fig. 1
2. Secure the handle to the handle brackets with the knobs
and J-bolts. Make sure the knobs are tightened (Fig. 2).
Fig. 2
3. Align the holes in the upper handle section with those in
the handle brackets (Fig. 3).
Fig. 3
6