Kalorik BL 46505 Manual De Instrucciones página 7

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3. Turn the bottle upside down and attach to the blender base. Turn
the bottle clockwise to secure it to the base.
4. Insert the power plug into the outlet.
5. Press the pulse button to start the blender and keep pressing until
ingredients are completely blended. When the ON switch is
released, the drive will be immediately turned off and the blender
blades will stop.
Caution: the device will not turn on if the bottle is installed
incorrectly.
6. When blending is completed, unplug the appliance.
7. Remove the bottle by turning counterclockwise to detach it from
the base.
8. Turn the bottle so that the blade base is at the top. Then, carefully
remove the blade by turning counterclockwise.
9. Install the sport lid on the bottle by turning it clockwise on top of
the bottle. You can now take your freshly made drink with you
anywhere! Use the foldable carry hook to easily carry the bottle
and open the top of the sport lid to conveniently drink directly
from the lid!
DO NOT operate the blender without attaching the bottle to the base
first. DO NOT blend continuously for more than 1 minute. Wait for the
unit to cool down before blending again.
If the blades become jammed, immediately release the ON switch,
disconnect the device from the mains, and remove the bottle with the
installed blender blades. Remove the cause of the jam in the bottle.
Notes:
This blender is designed to blend liquids and soft fruits and
vegetables. Examples of ingredients are water, milk, yogurt,
apples, bananas, carrots. Fruits and vegetables should be cut in
small pieces before blending.
For cool drinks, add small ice cubes and liquid (water or milk) to
the desired ingredients. We recommend a maximum amount of
ice of 0.2lb/90g per cup.
Caution: For best results, use the "pulse" function by pressing the
·
ON switch for short periods of time not exceeding a total of 30
seconds.
www.KALORIK.com
7
BL 46505 - 180330

Publicidad

Tabla de contenido
loading

Tabla de contenido