Fossil Ten Half Digit Manual Del Usuario página 5

DIGITAL CHRONOGRAPH
MD16377
A
B
TIMEKEEPING
12/24H format
1 . Press A to switch between 12/24h format.
Calendar
1 . In the timekeeping mode, press and hold D to display: year, month, date .
Time Setting
1 . In the timekeeping mode, press and hold A until the seconds flash to enter set state .
2 . Press D to reset the seconds .
3 . Press B to change to the next selection .
4 . Press D to increase the number .
5 . Repeat steps 3 and four in the following sequence: seconds - hour - minutes - year - month -
date .
6 . Press A to exit the set state .
ALARM
Alarm and Chime
1 . In the alarm mode, press d to on/off the alarm and chime
Alarm Time Setting
1 . In the alarm mode, press a to enter set state
2 . Press D to increase the hour .
3 . Press B to select the minutes .
4 . Press D to increase the minutes .
5 . Press A to exit the set state .
STOPWATCH
Laptime
1 . In the stopwatch mode, press D to start the stopwatch .
2 . To stop the stopwatch press D again .
3 . Press A to reset the stopwatch .
8
D
C
Split Time
1 . In the stopwatch mode, press D to start the stopwatch .
2 . Press A to display the split time, stopwatch timing continues internally .
3 . Press A to clear the split time and continue time measurement .
4 . Repeat step 2 and 3 to measure the multi-split time.
5 . Press D to stop the watch .
DUAL TIME
Dual Time Setting
1 . In the dual time mode, press A to enter set state .
2 . Press D to increase the hour .
3 . Press B to select the minutes .
4 . Press D to change the minutes .
5 . Press A to exit the set state .
DIGITAL
BJT024
A
B
TIMEKEEPING
Time Setting
1 . In timekeeping mode press A to convert the display date, second and normal time mode .
2 . Press B twice to enter the set state .
3 . Press B in the following sequence to change date and time: Month - Day - Hour - Minute - Normal
Time Mode .
4 . Press A to adjust .
5 . The adjustment hour "A" represents the morning and "P" represents the afternoon .
D
C
9