Tabla de contenido
Publicidad
REMARKS
Electrical connections shall be in accordance with national or local codes.
Read and save this instruction
INSTRUCTION FOR INSTALLING TABLE FAN
Warning:
Be sure to shut off electric supply at main switch or circuit breaker before installation. The important
safeguards and instruction appearing in this manual are not meant to cover all possible conditions
and situation that may occur. It must be understood that common sense, caution and care are factors
which cannot be built into any product, these factors must be supplied by the person(s) caring for
and operating the unit. No responsibility will be accepted for any damage which may occur during
transport or by improper installation or voltage fiuctuation or if any portion of the product has been
altered or modified.
Caution
1. Improper installation may result in the risk of fire, electric shock, or injury to persons. 2. To prevent
risk of fire and electric shock, do not use the unit near windows.
3. Power plug must be removed from power socket before cleaning, servicing, maintence and when
moving from one location to another.
4. The fan should be placed on a fiat and stable surface when operating to avoid overturning. 5. The fan
should not be placed in a damp place or where humidity is high (such as in a bathroom).
PARTS DESCRIPTION
1. Front Guard
2. Safety nut and bolt set
3. Guard retaining clip
4. Blade
5. Guard mounting nub
6. Rear Guard
7. Motor shaft
8. Oscillation Knob
9. Push buttons
10. Power supply cord
TECHNICAL DATA
Rated voltage
Max. power consumption
: 220 - 240 V ~, 50 Hz
: 30 W
4
Publicidad
Tabla de contenido
