Prolonged Disuse - Gastrodomus TEU664P Serie Instalación, Uso, Mantenimiento

temperature of 30° up to a maximum of 260°.
The cooking time can be selected from infinite ("....")
to 120 min.
HUMIDIFIER
It is possible to select the percentage of humidity
inside the chamber when programming a cooking
cycle
the degree of humidity can be selected before the
cycle starts, but, if necessary, it can be set manually
during program execution as well.
Press T8 to select the percentage of humidity inside
the chamber
press the buttons T5 and T7 in order to select the
required value
confirm your selection by pressing T8
Press T8, and keep it pressed how long it is necessary,
to start manual cooking during the cycle
SALAMADER "GRILL"
Grill function can be switched on or off during any
cooking cycle by pressing the button T6 and it works
for maximum 30 min or until the end of program
execution
in order to start the grill function without any other
cooking cycle on, move on as follows:
Press T6, the label "Gri" appears on D2 display
press T4 to select a cooking time shorter than 30 min.
press the buttons T5 and T7 in order to select the
required value
confirm your selection by pressing T6
Press T9 in order to start the cooking cycle
MANUAL COOKING
Enter the data for manual cooking as per the
following points:
press T2 to select the cooking temperature. A label
showing current chamber temperature appears on
D1 display.
press the buttons T5 and T7 in order to change the
cooking temperature
confirm your selection by pressing T2
Press T4 in order to select the cooking time. The label
"...." (i.e. infinite) appears on display D2
press the buttons T5 and T7 in order to change the
cooking time
confirm your selection by pressing T4
See paragraph "HUMIDIFIER" to select the degree of
humidity in the cooking chamber
See paragraph "SALAMANDER" to activate the grill
function
At the end of the cooking cycle, the oven beeps.
Open the door and take the food off.
In order to switch the oven off press T3 until the label
is shut down on D1 display
COOKING PROGRAM STORAGE
The oven allows to store up to 99 programs.
To store a recipe please proceed as follows:
Press the button T1 for recipes
Select the program (for example P01) that is
displayed on D2 by pressing T5 and T7 and confirm by
pressing T1.
Enter the data you want to store, as explained in the
paragraph "MANUAL COOKING"
At the end of phases' setting, wait for the display of
the label with the program's name (for example P01)
on D2 screen, press T1 until L1 starts flashing.
Warning: it is not possible to programme a cooking
cycle with grill function
LOADING A STORED COOKING PROGRAM
press T1 to choose a programme among the one
stored in the oven memory, and press the buttons T5
and T7 to choose the program number
confirm your selection by pressing T1
Press T9 to start the program
CHANGE OF A COOKING PROGRAM
To modify a stored program choose the program as
explained at the previous chapter (COOKING
PROGRAM STORAGE).
Data can be modified during the cooking cycle, but
the changes applied are not stored at the end of the
cycle
10.

PROLONGED DISUSE

19