Symbol QRG LS 4008i Manual De Instrucciones página 6

Problem
Symbol is decoded, but
not transmitted to the
host.
Scanned data is incor-
rectly displayed on the
host.
L S 4
Possible Cause
Bar code symbol is
unreadable.
Distance between
scanner and bar
code is incorrect.
Scanner is not pro-
grammed for the
correct host type.
Scanner is not pro-
grammed to work
with the host. Check
scanner host type
parameters or edit-
ing options.
0 0 8
Possible Solutions
Check the symbol to make sure
it is not defaced. Try scanning
test symbols of the same bar
code type.
Move the scanner closer to the
bar code.
Scan the appropriate host type
bar code.
Be sure proper host is selected.
For RS-232, ensure the scan-
ner's communication parame-
ters match the host's settings.
For a keyboard wedge configu-
ration, ensure the system is
programmed for the correct
keyboard type, and the CAPS
LOCK key is off.
Be sure editing options (e.g.,
UPC-E to UPC-A Conversion)
are properly programmed.
4
i