Parts And Components; Before Use; Operation - cecotec CLASSICTOAST 15000 BLUE EXTRA DOUBLE Manual De Instrucciones

1. PARTS AND COMPONENTS

Fig. 1
1. 2 38-mm wide slots
2. Cool-touch body
3. Toast lever knob/Display
4. One-touch crumb-collecting tray
5. Stop button
6. Reheat button
7. Defrost button
8. Toast lever
9. Bun warmer

2. BEFORE USE

Take the product out of the box.
Remove all packaging materials. Keep the original box.
Make sure all the components are included and in good conditions, otherwise, contact
immediately the official Technical Support Service of Cecotec.
Before using the toaster for the first time, it is important to perform a toasting process
without bread. We recommend 4 or 5 times. Press the toast lever until it latches into place.
When the toasting is finished, the toast levers automatically jump up. The toaster is now
ready to be used with bread.
Warning: A slight odour and smoke might appear when heating the device for the first
time. This is due to manufacturing materials residues and does not affect the appliance's
operating.

3. OPERATION

Introduce the slices of bread in the slots.
Use the power knob to select the desired toasting grade. There are 6 different levels, from 1
(Light toasting) to 6 (Dark toasting).
Note: Set level 3 (Medium toasting) for brown results.
Push the toast lever down until they latch into place. The stop indicator light will turn on and
the toasting process will start.
The toasting setting can be adjusted while operating. The display will show the chosen
toasting setting and a countdown will start automatically, depending on the toasting setting.
The toaster will switch off automatically after the timer finishes and the toasts will be ejected
from the slots.
CLASSICTOAST 15000 BLUE / BEIGE / YELLOW
ENGLISH
31