Virtual Zoning" Features - Carrier Comfort Module Serie Manual De Instrucciones

Programming the user interface

"Virtual Zoning" features

With "Virtual Zone" features, it's possible to set the variable
table and the schedule for different zones than the own.
It's possible to use it only in Master User Interface and in all
User Interface of Access Level 3 boards (see unit manual for
more details).
Press
The meaning of the Zone Icons are:
: the own zone of the user interface
-
: the other zone connected to the board (available only
for Access level 2 and 3, for master board it's related to the
second user interface)
6
Press
Press
Press
Press
Display Own Address
Press
It works selecting the address of the board to control
and the zone (if it's a dual zone board) and the Zone Icon
indicates what is the zone controlled.
Use the Zone Key to switch between the Virtual zones and the
own zone, following the below logic. The image shows all the
possible options, the available depend on the access level.
for more than 5 seconds
Select the board address with arrow keys
Press
for more than 5 seconds
: master board (available only for Access level 3 and
Master user interface)
: zone 1 of the board selected by the address (available
only for Access level 3)
: zone 2 of the board selected by the address (available
only for Access level 3)
Press
Press