Sauder Heritage Hill 109848 Instrucciones De Montaje página 24

Step 20
If the 109843 Executive Desk has only been partially
å
assembled, go to step 22 now. If the 109843 Executive
Desk has already been completely assembled, continue
with this step.
Position the 109843 Desk on its Top as shown.
å
Carefully remove the entire pedestal assembly from the
å
left side of the Desk. To do so, remove the two screws that
attach the Left Upright to the Modesty Panel and loosen
the four Twist-Lock® Fasteners in the Left End and Left
Upright by turning the screw in each Fastener about 1/2
turn counter-clockwise. Then, pull the pedestal assembly
off of the Top as shown.
NOTE: Save these screws and set the pedestal assembly
å
off to the side.
Page 24
109843
Left Upright
1 0
9 8
M o
4 3
d e
P a
s t y
n e
l
109848
RETURN KIT(S) ON LEFT
4 3
9 8
1 0
f t
L e
d
E n
1. Remove these screws.
www.sauder.com/services