Assembly Inumbrina Table - Extremis INUMBRINA Manual De Instrucciones

ASSEMBLY INUMBRINA TABLES
WHAT YOU NEED
1 person
no. 10 spanner
no. 4 hex key
+/- 20 min.
6 assembly tables - maintenance
1. Fasten the (table) anchor tube to
the base plate using the provided
bolts and blind nuts, as shown on
the drawing. The tabletop should
be assembled in the same way.
Always make sure that the two
handles are situated one above the
other and that the adjusting screw
is hidden under the tabletop.
2. Insert the Inumbrina parasol
in the anchor tube and fasten it
by turning the adjusting screw
clockwise. Always
the adjusting screw until the
InUmbrina can no longer revolve
on its axle.
tighten