DoorBird D11x Manual De Instalación página 9

4.1 ASSEMBLING THE FRONT PANEL
Remove the front panel with the attached Main Electrical Unit carefully from the mounting housing (backbox)
using the screw driver provided.
We have designed the front panel and safety screws in a way that they cannot be screwed through the
front panel so that they do not fall off / get lost during installation.
D1101V
Turn the safety screws counter-clockwise until
they are loose.
Pull the front panel with attached Main Electrical
Unit out of the mounting housing (backbox).
4.2 MOUNTING
Lead all cables and wires you want to connect to the device through the mounting housing.
Flush-mounted models
D1102V D1101KH
Turn the safety screws counter-clockwise until
they are loose.
Pull down the front
panel.
Surface-mounted models
Before mounting: Pierce
through the middle of the
rubber seal for the cable
entry using a screwdriver.
Pull the front panel with
attached Main Electrical
Unit out of the mounting
housing (backbox).
9