TURNING THE APPLIANCE ON, USE AND TURNING THE APPLIANCE OFF QSE_
QSE_40 model
QSE_60 model
Activate the switch located upstream of the
appliance
Turn the knob "A" clockwise setting the
time that will be shown on the display "X"
(minutes and seconds)
The green pilot light "B" turns on, and the
orange pilot light "Y" flashes throughout
the setup phase.
Then press the "C" button to start cooking.
The orange pilot light "Y" passes from
flashing to fixed for all the time set. The
appliance will remain on for the set time
and the screen will show the time
remaining before the appliance turns off;
the point in the centre of the screen "X"
flashes.
The time set at the start of the cooking in
progress is shown when holding down the
"C" button while the appliance is working
(point in the centre of the flashing screen).
By holding down the "D" button, it will be
possible to stop the appliance: the screen
will show the cooking time set, and the
orange LED light "Y" starts flashing again. In
these conditions cooking can be started
again by pushing the "C" button again, or
the time set can be changed using the knob
"A".
An acoustic warning signals the end of the
cooking cycle.
To turn the appliance off bring the knob
back to the "0" position.
ONLY QSE_60
Use the "Z" button to select half or all of the
cooking
corresponding "Y" orange LED light turns
on.
EN - 5
surface
for
operation;
the