Setting The Alarm - Yamaha TSX-132 Manual De Instrucciones

Setting the alarm

Set the alarm time and alarm type
Alarm settings cannot be made when the unit is in power saving. If you want to use the alarm function, set the rear panel CLOCK switch to
the ON position.
1
2
3
Alarm time
9 : 1 2
C o m p l e t e d !
Alarm indicator
1 Press SET.
The alarm indicator (
2 Set the alarm.
Set items 1 - 5 described below.
Press – / + to select a numerical value, and press ENTER to confirm it.
Items
ALARM SELECT
1
ALARM TIME
2
3 ALARM TYPE
ALARM SOURCE
4
(If you selected
SOURCE+BEEP or
SOURCE as the
ALARM TYPE)
ALARM VOLUME Specifies the volume (5-60) of the alarm.
5
3 Complete the settings.
When you set the VOLUME for item
"Completed!" and your settings will be confirmed. This completes the alarm
setting.
The alarm will be turned on and the alarm indicator (
• By pressing SET during this procedure, you can confirm the alarm settings with the
currently-specified values and complete the procedure.
• If you decide to cancel alarm settings mid-way through the procedure, turn the system off.
) will blink.
Setting or range
* This can be selected after you've used "DTA Controller"
to set the alarm (☞ P. 12). If you're not using "DTA
2
Controller," proceed to item
ONE DAY: An alarm that sounds only once at the
specified time.
WEEKLY: An alarm whose time can be specified for
each day of the week (settable only using
"DTA Controller")
If you've chosen WEEKLY, this completes the alarm
setting.
Make settings in the order of hours
Select from SOURCE+BEEP, SOURCE or BEEP.
For details, refer to "3 types of alarms" (P. 12).
If you selected BEEP, proceed to item
iPod: Play back music from your iPod (Refer to
"Various audio sources" (P. 12).)
CD: Play back music from a CD.
Specify the track number (data CD: folder
number) (RESUME, 1-99).
USB: Play back music from a USB device.
Specify the folder number (RESUME, 1-999).
FM: Play a radio station.
Specify the preset number (RESUME, 1-30).
If the selected source cannot be played back at the time
set for the alarm (e.g., the iPod is not connected), the beep
sound is played back.
If you choose RESUME when specifying the track/
folder/preset number, the last-played track/folder/station
will be played (resume playback).
5 , the display will indicate
USING THE ALARM FUNCTION
.
minutes.
5
.
) will light.
13
En