3.
Cut the tip of the yellow nipple.
Attention: Do not remove the entire yellow cap!
4.
Turn the cartridges into the screw joint.
Hand tighten the cartridges.
5.
The assembled unit is fixed e.g. at the machine frame. The ropes shall run in the first third of the brush.
6.
Adjusting the duration of the output:
The numbers indicate the duration in months until the 125ml cartridge
will be empty.
The adjustment depends on the rope diameter, the number of rides
and the rope bend.
If there are no empirical values, a first adjustment for 8-12 months is
recommended.
©W+W 07.2018 Version 2
7