_______________________________________________________________________________
1. General
It is a handheld digital Clamp Meter with the measuring functions of ACA, ACV, DCV, Resistance,
Frequency, Temperature and etc., it could be used in Lab, family and other circumstance, where high
current measurement is required.
2. Safety Note
The instrument's design meets the standard of IEC1010-1 (EN61010-1) pollution 2, CAT.600V and
UL3111-1. Please read the following before operation.
2-1. Safety Symbols
Caution! Refer to the operation manual before operation;
" " Warning!
" " Risk of electrical shock!
2-2. Notes
2-2-1. Read the operation manual before using, and operate the instrument complying with the stipulations in
this manual, to avoid endangering the safety and damaging the instrument!
2-2-2. Please make sure the test leads off the tested point and there is no any input signal before opening
the case. Keep the instrument away from water to avoid electric shock and instrument damage.
2-2-3. Please do not measure before fixing the case and locking the screw.
2-2-4. Do not exceed maximum allowable input of any function when making measurement.
2-2-5. Do not apply voltage to terminal at Resistance Range.
2-2-6. Always set the power switch to OFF position after use.
2-2-7. For a long time storage, Please take the battery out to avoid the leakage of battery to damage the
internal components.
2-2-8. Voltage above 60V DC or 30V AC RMS may create the serious electric hazard.
2-2-9. Be extremely caution when clamping the un-insulated conductor or bus bar, it could result in electric
shock to accidentally contact with the conductor.
3. Property
3-1. General Property
3-1-1. Display: LCD display
automatic polarity Display.
3-1-3. Max Jaw Opening: 35mm
Display.
3-1-5. Hold: Date Hold.
3-1-7. Sampling Rate: 3tims/second
3-1-9. Continuity Test: Buzzer sounds at less than (50 20)
3-1-11.Auto Power Off
mA
3-1-13.Power Supply: 1pc 9V battery (IEC6LF22, NEDA1604 or JIS006P)
3-1-14.Operation Environment: 0-40 , Relative Humidity: <70% RH.
3-1-15.Dimension: 230mm x 80mm x 37mm
3-1-16.Weight: Approx. 270g (including battery)
3-1-17.Accessory: Operation Manual, Gift Box, Test Leads, Temperature Probe TP01, 9V battery.
3-2 Technical Property
©Copyright Abacanto Digital SA.
AD-6016 OPERATION MANUAL
" " Dual insulation!
Manual de usuario AD6016A
AD Instruments
" " Low battery!
3-1-2. Max Display: 3999 (3 3/4) digit
3-1-4. Over range Indication: "OL"
3-1-6. DCA Auto Zero Adjustment
3-1-8. Low Battery Indication
. 3-1-10.Auto Range
3-1-12.Power Consumption: Approx. 3
17