Supplied Parts - Sanus Systems WMS3 Instrucciones De Montaje

WMS3 Speaker Wall Mount
Thank you for choosing a Sanus Systems product. Please read the entire manual before proceeding. This product is designed
for speakers weighing 8 pounds or less. Never use defective parts. Improper installation may cause damage or serious in-
jury. If you do not understand these directions, or have any doubts about the safety of the installation, please call a qualified
contractor or contact Sanus at (800)359-5520 or www.sanus.com for assistance. We would be glad to help with any issues
regarding installation or missing parts. Parts missing from Sanus products purchased through authorized dealers can be
shipped directly to you.

Supplied Parts:

(4) Wall/Speaker Plate - a
(2) Satellite Speaker Adapter - d
Supplied Hardware:
(4) #12 x 3/4" Self Tapping Screw - g
(4) #12 x 1 3/4" Self Tapping Screw - h
(4) #12 Plastic Anchor - i
(2) #8 x 3/4" Self Tapping Screw - j
(4) 1/4-20 x 1/2" Machine Screw - k
(2) 1/4-20 x 7/8" Machine Screw - l
Required Tools: Hammer, Phillips Screw Driver, Drill, Drill Bits.
(2) Ceiling Extension - b
(8) Wall Plate Hardware Cover - e (4) Arm Assembly Hardware Cover - f
(2) M5 x 20mm Machine Screw - m
(2) M5 x 1/8" Plastic Spacer - n
(2) 8-32 x 5/8" Machine Screw - o
(2) 8-32 Key Hole Nut - p
(2) M4 x 8mm Flat Head Machine Screw - q
(1) Allen Key - r
(2) Arm Assembly - c