How To Use The Hand Mixer; To Attach Accessories; To Remove Accessories - KitchenAid 5KSM125EER Manual De Instrucciones

How to use the Hand Mixer

Be sure to read and follow the specific
instructions in this manual for proper use
of this Hand Mixer.
note: Flashing light indicates ready to
operate. Do not touch beaters. If the
Hand Mixer runs when "0" is flashing, or
there is nothing displayed on the speed
indicator, do not use. Arrange for service.

to attach accessories

Paired accessories (High Performance
Beaters) include one accessory with a
collar (A), and one without (B). Single
accessories come with a collar (A) (Liquid
Blending Rod) or without (B).
a
When using a Pair of accessories
1. Place Master Power Switch in the "OFF"
position.
2. Insert the accessory shaft with the
collar (A) into the larger opening (D)
of the hand mixer. Align the flanges on
the shaft with the slots in the opening.
Push to lock into place.
W10406845B_EN_v01.indd 7
3. Insert the accessory without a collar (B)
into the smaller opening (C). Align and
push to lock into place.
When using a single accessory
An accessory shaft without a collar
B
may be used in either opening (C or D).
Those with a collar may only be used in
the larger opening (D). For attachment
instructions, see "When Using a Pair of
Accessories".

to remove accessories

1. If the Hand Mixer is running, stop
the Hand Mixer by touching
turning the Master Power Switch to
the "OFF" position.
2. Unplug the Hand Mixer from the
electrical outlet.
3. Press the Ejector Button (E) to release
the accessories from the Hand Mixer,
then remove them.
7
c d
and
e
11/2/11 1:19 PM