Using The Product - Handicare Coral 3002020050 Manual De Instrucciones

English

Using the product

1a
2a
3
5
6
1b
2b
3. Push down
the brake on
E-clip
each castor
to prevent
the chair from
moving.
5. Adjust the height of
the footrest by repo-
sitioning the E-clips.
1. Remove the E-
clips.
2. Lower or lift the
footrests to the
desired height.
3. Snap the E-clips
in place.
1a. To prevent the chair
from tilting or tipping
over do not stand on
the footrest!
4
6
1b. Swing the footrests
outwards before
standing up (See
drawing 6).
2a, 2b. Use the full depth of the seat.
Make sure that the feet are
properly supported before
leaning forward!
4. Adjust the height of the
chair by repositioning the
E-clips without a user in
the chair.
1. Remove the E-clips.
2. Lower or lift the legs to
desired height.
3. Snap the E-clips in
place.
4. Assure that all legs
have the same height.
6. Footrests can
be swung
outwards.
To rotate
the footrest
first lift the
footrest off
its E-clip
(See figure
on footrest).
M A N U A L