Handicare Coral 3002020050 Manual De Instrucciones página 9

E-clip footrest
9
9. Click the E-clip for the footrest
at the desired height in the cas-
tor tube. Make sure that the pin
turned with the right side up, see
picture. Slide the footrest on the
castor tube and let it rest onto the
pin of the E-clip.
12
12. Place the backrest cover over
the frame of the backrest and pull it
firmly into place.
15
15. Rotate the toilet rail until the
front pins align with the front key-
holes. Push outward until it snaps
in place.
M A N U A L
10
10. Turn the castor with footrest
upside down. Slide the castor
tube into the front leg. Make sure
the open side of the E-clip for
the footrest is facing inwards.
Click the E-clip throught the chair
leg and castor tube at the same
height as the rear castors.
13
13. Tighten the straps of the cover
around the frame onto the velcro. To
obtain the desired tension adjust the
straps.
16
16. Finally, check the whole chair once
again to make sure that all parts are in
.
place and secured
11
11. Turn the chair upright. Make sure
that all parts are in place and secured.
14
14. Place the rear pin of the toilet rail
(2x) into the rear keyhole in the base
plate. Push forward until it snaps in
place.
English
9