One for All URC-7960 Manual Del Usuario página 19

Example 1 (configuration as shown):
How to activate "watch tv" combination 1
1) Press and hold magic key for 3 sec.
2) Press and release "watch tv".
3) Press and release "1".
Example 2:
How to activate "watch movie" combination. 2
1) Press and hold magic key for 3 sec.
2) Press and release "watch movie".
3) Press and release "2".
When in SmartControl (watch tv, watch movie, listen to music) the "help" function enables you to
find the correct A/V (audio/video) input. Simply press "audio" over and over until you hear the
sound of the corresponding device (e.g. amp or mp3)....or press "video" over and over to see the
picture of the corresponding device (e.g. stb or dvd).
dvd
playing
DVD DVD
press "video" over and over
until you can see the picture
of the dvd playing.
E.g. How to activate the "help" function for finding the video (or audio for
amp/mp3) -input in SmartControl in "watch tv" mode.
1) Press and hold magic key for 3 sec. --> Blue ring will light up twice.
2) Press (e.g.)Watch tv. Blue ring will light up twice.
3) Press video (or audio). Blue ring will light up twice.
E.g. To deactivate the "help" function in SmartControl in "watch tv" mode.
1) Press and hold magic key for 3 sec. --> Blue ring will light up twice.
2) Press (e.g.) Watch tv. Blue ring will light up twice.
3) Press video (or audio). Blue ring will light up 4 times.
• If the "help" function is providing wrong A/V input(s) or a different function
you may be using the wrong code. Please repeat the "SimpleSet" procedure
or try the next code within the "Direct Code Set Up" procedure.
Problem
--> The Blue ring will light up twice.
--> The Blue ring will light up twice.
NO
picture
- Solution
-
-
dvd
playing
19
DVD DVD
Now you should hear the
dvd playing. If NOT please
repeat this procedure
pressing the "audio" key.