5.
FIRST USE
1
Ensure to use the correct mains voltage as given in 2. on
page 1. Connect power plugto mains power socket. Press
ON / OFF icon. Machine moves automatically to preparing a
beverage position.
4
Make sure that rinsing tool is incapsule holder and capsule
holder is in machine. Place an empty large container under-
neath the coffee outlet.
7
Continue rinsing with hot water. Set bar display to max-
imum level withtouch volume selector. Touch hot water
icon. Machine starts rinsing. Lights on bar display vanish
progressively.
2
While machine is heating up, ON / OFF icon starts blinking
red. After approx. 30 seconds, ON / OFF iconlights up
steady green. Machine is ready to use.
5
Start rinsing with cold water: Set bar display to maximum
level with touch volume selector. Touch coldwater icon.
Machine starts rinsing. Lights onbar display vanish pro-
gressively.
8
Waituntil countdown is finished and machine stops.
10
3
Rinse water tank manually with fresh drinking water. Fill
water tank withfresh drinking water. Insert water tank into
machine.
6
Waituntil countdown is finished and machine stops.
9
Remove rinsing tool. Warning: Hot water! Handle with care!
Empty container. Fill water tank withfresh drinking water.
Insertwater tank into machine. Place drip grid on driptray.
Reinsertdrip tray.