3: Installing The Tdm-Ip50 - Sony TDM-iP50 Manual De Instrucciones

3: Installing the TDM-iP50

Connect and position the TDM-iP50 as illustrated below.
Video cable
(not supplied)
TV
TV
If your AV system cannot output video signals when the system is
in DMPORT function
Connect the composite video cable (not supplied) to the VIDEO OUT jack
of this unit.
Refer to the user's guide of your AV system for further information.
TV
Notes
• This unit turns on/off automatically whenever the connected AV system (DAV
series, etc.) turns on/off.
• When connecting a video cable to a TV that has a SCART (EURO AV) jack, use a
commercially available conversion connector.
• When connecting the composite video cable to the VIDEO OUT jack of the unit,
no image is output from the DIGITAL MEDIA PORT cable of the unit.
AV system
(Sony DAV series, STR series, etc.)
DIGITAL MEDIA PORT cable
DMPORT
AV system
(Sony HT series, etc.)
Composite video cable (not supplied)
DIGITAL MEDIA
PORT cable
DMPORT
TDM-iP50
DIGITAL MEDIA
PORT cable
TDM-iP50
TDM-iP50
continued
US
7