3: Installing The Tdm-Ip1 - Sony TDM-iP1 Manual De Instrucciones

3: Installing the TDM-iP1

Connect and position the TDM-iP1 as illustrated below.
Video cable
(not supplied)
TV
To connect to an AV system which cannot output video signals
when the system is in DMPORT function
Connect the supplied composite video cable to the VIDEO OUT jack of
this unit.
Refer to the user's guide of your AV system for further information.
TV
Notes
• This unit turns on/off automatically whenever the connected AV system (DAV
series, etc.) turns on/off.
• When connecting a video cable to a TV that has a SCART (EURO AV) jack, use a
commercially available conversion connector.
• When connecting the composite video cable to the VIDEO OUT jack of the unit,
no image is output from the DIGITAL MEDIA PORT cable of the unit.
AV system (Sony DAV
series, STR series, etc.)
AV system
(Sony HT series, etc.)
Composite video cable (supplied)
DIGITAL MEDIA
PORT cable
DMPORT
DIGITAL MEDIA
PORT cable
TDM-iP1
TDM-iP1
continued
GB
7