Westfalia 313318600001 Instrucciones De Montaje página 4

SIARR
09 - 52
PREPARATION
* Disassemble the 3 bumper plastic covers.
* Disassemble the bumper (1 screw on either side and 2 bolts in the center).
ASSEMBLY
* Position the reinforcement slabs (A) under the vehicle
between the spars and the rear cross beam.
* Fasten them in front of the existing holes
with the nuts and bolts W and X.
* Attach the part (B) of the towing to the existing
nuts on the vehicle with the nuts and bolts Y.
FINISHING
* Tighten all the nuts and bolts to the torque indicated as follows.
* Assemble the bumper as well as the 2 side covers.
FASTENING KIT
4 off HM10x30 screws
4 off HM10 nuts
4 off CS10 washers
W
4 off 10-22 plain washers
4 off 10-40 plain washers
4 off spacers dia.22 lg.87
4 off HM14x40 screws
Y
4 off.14-34 plain washers
4 off DEC14 washers
M16 AC8.8 19,5daNm M12
M16 AC10.9 27,5daNm M10
M12 AC8.8 8,1daNm M10
ASSEMBLY INSTRUCTIONS
4 off HM10x90 screws
4 off HM10 nuts
4 off CS10 washers
X
4 off 10-22 plain washers
4 off 10-40 plain washers
4 off spacers dia.22 lg.55
2 off HM16x45 screws
Z
2 off DEC16 washers
2 off HM16 nuts
TORQUES :
AC10.9 11,4daNm M8 AC8.8
AC8.8 4,7daNm M8 AC10.9
AC10.9 6,7daNm
Type Type
Approval No.
Tow-bar for
Mercedes 4x4 e11*94/20*01*1569
Classe M
NB : Electrical diagram inside our universal or custom wiring kits.
PLEASE NOTE : (to familiarise yourself with the operating charasteristics refer to the log)
2,3daNm If this tow bar is fitted in accordance with our recommendations it will give a complete-
3,3daNm ly satisfaction. We cannot accept any responsability in the event of changes to or
improper use of this item.
FICHIER : BUREAU\NOTICEDEMONTAGE\WESTFALIA\NDM0952-D - FOLIO NDMANG
313318600001
Note : Spare wheel under the vehicle
Max. Total Max. Total
Authori. Weight Towable Weight
2 810 kg 3 370 kg
Max. Verti- Value
cal load D
135 kg 15,03 kN