ZIGBEE Q-Control 7202-21 Manual De Instrucciones página 34

7. Create, save or delete scenes
To save
scenes, hold
down the scene
keys for at least
5 seconds until
the status LED
fl ashes. Scenes can
be activated by a
brief key press
Switch on all lights/devices to be included in the
scene. Now switch all lights/devices to the desired
operating state (e.g. dim lights accordingly or select
the desired colour setting, as described at points 1.
to 4.). Then hold down one of the Q remote control
unit's four scene keys for 5 seconds. Status LED fla-
shes four times for a second at a time and then three
times briefly in succession. The scene has been saved.
Status LED
fl ashes
1 sec.
34
Q-Control_Fernbedienungsanl_8.indd 34
2 secs. 3 secs.
Keys
| | |
A maximum of
4 scenes can be
saved to the scene
keys
4 secs. 5 secs.
27.03.17 11:31