Speedlink RF Notebook Mouse Manual De Uso página 15

2. The plug&play function of your system will
automatically detect that a new device has
been connected. Windows may ask you to
insert the Windows Installation CD. Follow the
instructions on the screen.
Note: Windows 95/NT do not support USB
devices.
If necessary, you can use the supplied USB exten-
sion cable.
Establishing the RF detection
To synchronise the mouse and receiver, you have
to establish RF detection before you can use the
mouse:
1. Move the switch on the bottom of the mouse
to the „On" position.
2. Press the button on the top of the receiver
and then, with the help of the pointed object
(e.g. pen), the button on the bottom of your
mouse.
3. The LED display will light up when doing this.
The LED should flash when you move the
mouse.
15
D
GB
F
E
I