Answering System Indicator; Screening Calls From The Handset; Memory Full; Accessing The Answering System From Another Location - GE 27958 Guia Del Usuario

A S I
NSWERING YSTEM NDICATOR
The answering system is active when the display on the base shows ANS ON .
S C
CREENING ALLS FROM THE
Use the handset to screen calls even when you can't hear the answering
system.
When the answering system picks up:
1. Press the cordless handset answerer/format button to gain access to the
answering system.
2. Listen to the caller leaving a message.
3. Press the TALK/CALLBACK button to speak to the caller, or press the
answer/format button to stop screening the call.
M F
EMORY ULL
When the answering system's memory is full, the system answers after 10
rings, beeps, and waits for you to enter the 3-digit security code. You have
10 seconds to enter the security code before the phone hangs up.
You should erase some of the messages in order for the system to record
incoming messages.
NOTE: The unit also answers after the 10th ring if it is turned off. To access
the answering system, enter your 3-digit security code after you hear the beep.
A A
CCESSING THE NSWERING
You can access your answering system from any touch-tone phone by
entering your 3-digit security code after you hear the outgoing
announcement.
1. Dial the phone number the answering system is connected to.
2. After the answering system answers, enter the security code after you
hear the tone.
3. Follow the voice menu to use the answering system's remote functions.
All manuals and user guides at all-guides.com
H
ANDSET
S A
YSTEM FROM NOTHER
L
OCATION
35