Caller Id Errors; Answering System Set; System Setup - GE 21091 Guía Del Usario

2. Use the cid/vol (
button on the base to display any Caller ID record.
3. Press and hold the DEL soft key for two seconds. The display shows
DELETE ALL?
4. Press the OK soft key to erase all CID records from memory. The display
shows NO CALLS . You will hear a confirmation tone.
NOTE: Press the EXIT soft key once to return to the CID review menu. Or,
press and hold the EXIT soft key to return to standby mode.
C ID E
ALLER RRORS
If there is an error in the transmission of information to your phone,
ERROR or INCOMPLETE DATA shows in the display. If you are not
subscribed to Caller ID (CID) service, or it is not working properly, NO
DATA shows in the display.
A S
NSWERING
This section shows you how to set up your answering machine to receive
incoming calls. Answering system setup may only be done at the base.
48
or ) button on the handset or CID/messages (
9:58
AM
12 34567890 1 2 34 5
SAVE
DELETE ALL ?
OK
NO CALLS
S U
YSTEM ET
11/24 01
NEW CALL
NAME
DEL EXIT
EXIT
P
or )