Gas Connection - Brixton BQ-6346 Manual De Instrucciones

Step 3:
Please see the picture below for installation.
Then your gas grill is ready for use .
ONLY USE THE REGULATOR AND HOSE ASSEMBLY PROVIDED WITH THIS GRILL.
REPLACEMENT PRESSURE REGULATORS AND HOSE ASSEMBLIES MUST BE THOSE
SPECIFIED BY THE MANUFACTURER.
This is a L.P. (Liquefied Petroleum Gas) configured grill. Do not attempt to use a natural gas supply unless
the grill has been reconfigured for natural gas use.
L.P. tank Requirements:
The L.P. tank used with your grill must meet the following requirements:
•
Measurement: 12''(30.5cm) (Diameter) X 18'' (45.7cm) (Tall)
•
Maximum Capacity: 20lbs. (9Kg)
•
Constructed and marked in accordance with the specification for L.P.-gas cylinders See L.P. tank collar for
marking.
•
Be arranged for vapor withdrawal.
•
Has a collar to protect the tank valve.
•
No dent or rust. A dented or rusty L.P. tank may be hazardous.
L.P. tank valve used must meet the following requirements:
•
Have type I outlet compatible with regulator provided.
•
Have safety relief valve.
•
UL listed Overfill Protection Device (OPD), This OPD safety feature is identified by a unique triangular hand
wheel. Only use tanks equipped with this type of valve.
For your safety:
Ensure that the black plastic grommets of the regulator provided are in place and that the hose does not come
into contact with the heat shield or the grill head.

GAS CONNECTION

8