Euroflex SteamShark Manual De Instrucciones página 23

If you consistently use demineralized or distilled water,
cleaning the tank is unnecessary.
Rinsing out the steam cleaner:
Normally, a periodic rinse of your Steam Shark will free it
from deposits. This is recommended every 10-15 tankfulls,
to free up any scale deposits from the tank.
Fill the boiler with water and shake the cleaner vigorously.
Tilt the cleaner upside down to empty the boiler of water
and any scale deposits.
Descaling your steam cleaner:
If the tap water in you area contains a high level of calcium
deposits and you have been using tap water to do your
steam cleaning, your should descale your unit after 10-15
tankfulls.
Step 1: Unplug the steam cleaner from the power
source before you descale the boiler.
Step 2: Fill the boiler with 1 part (150 cc.) vinegar and
4 parts (600 cc.) water and leave overnight or
for a period of approximately 8 hours. Do not
screw the safety/filler cap onto the steam
cleaner while you are descaling the boiler. Do
not use the steam cleaner while descaling
solution is inside the boiler.
Step 3: After the period of soaking, turn the steam
cleaner upside down to empty solution from
the boiler. Due to the fact that a small amount
of solution will be left in the boiler, it is
necessary to rinse the boiler out with clean
water 2 or 3 times. Your steam cleaner is now
ready for use.
CARE & MAINTENANCE
Attaching the Shoulder Strap
Using the detachable shoulder strap allows for greater
freedom of movement when both hands are needed for
various cleaning tasks.
To attach the shoulder strap to the steam cleaner, simply
snap the shoulder strap hooks onto the connecting rings
on the unit body. See illustrations below.
When using the Steam Shark with the shoulder strap, avoid
rocking or tilting the unit excessively as this may cause
water to enter the hose and be discharged along with the
steam.
23
Puntos de Enganche