TEFAL UltraBlend BL936E Manual De Instrucciones página 6

Problems
The appliance stopped
while in use
Excessive vibrations
Leak from the lid
Leak from the bottom of
the blender jug
The blades do not turn
easily
8
Causes
Overload
The silicon gasket is missing or not
correctly positioned.
The product is not placed on a flat
surface.
Volume of ingredients is too high.
The silicon gasket is missing or not
correctly positioned.
Volume of ingredients is too high.
The lid is not correctly positioned
Deterioration of the
watertightness of the appliance
Pieces of food too large or too
hard.
The blended liquid is too hot and
distorted the silicone gasket.
Solutions
Follow the instructions in section
Overload.
Place the silicone gasket correctly
on the motor unit.
Place the appliance on a flat
surface.
Reduce the quantity of ingredients
processed.
Place the silicone gasket correctly
on the motor unit.
Reduce the quantity of ingredients
processed.
Place the lid correctly on the
blender jug.
Caution : the blades are not
removable.
Contact the consumer service, see
contact information in the
warranty leaflet.
Reduce the size or quantity of
ingredients processed.
Replace the gasket with a new
one.