Parameter Setup; Important - Fermax 1024 Manual De Instrucciones

Idiomas disponibles

PARAMETER SETUP

It is possible to set up other parameters related to the installation

The first step in configuring any of these parameters is to access programming:

1. Press

2 Press the key

Communication with the outdoor panel is established.

3. Press the key

IMPORTANT: Wait two seconds between every key pressing in programming mode.

a) Electric lock activation timing, when activated from the telephone (4

seconds by default).

1. Press

2. Select the desired timing in seconds (from 1 to 9)

b) Electric lock activation timing, when activated from the OPEN DOOR

BUTTON, if there is one installed (4 seconds by default).

1. Press

2. Select the desired timing in seconds (from 1 to 9)

c) Auxiliary device activation timing (if installed, 4 seconds by default).

1. Press

2. Select the desired timing in seconds (from 1 to 9)

d) Outdoor panel speaker volume (5 by default)

1. Press

2. Select the volume level required (from 1 to 5). See NOTE.

After setting up the required parameters, exit programming mode by pressing the

key

NOTE:

* * * * * As well as volume control by programming, it is also possible to regulate

As well as volume control by programming, it is also possible to regulate

panel volume by means of the adjustement potentiometer on the back

of the panel.

* * * * * It is recommended to leave it at maximum and regulate it by software.

It is recommended to leave it at maximum and regulate it by software.

Pag 10

to enter Programming followed to be programmed.

Tabla de Contenido

Dect