Parameter Programming And Configuration; Codes - Fermax ADS Manual De Introducción

PARAMETER PROGRAMMING AND CONFIGURATION

Now we shall explain some aspects which, rather than operation, refer more to
equipment configuration parameters. So, in order to prevent any unwanted anomalies
in operations, these should only be used by the technical staff in charge of maintenance
of the system.
Programming
To enter programming mode:
To access each of the main menu options, press the key corresponding
to the number that precedes each option (for example, to access the
"Codes" option, press key1") .
Press the "B" key to exit programming mode.
1. Press"0"
The display shows a series of dashes
2. Enter the access code: AB21AB
Now enter the programming code: 19025 (this code may
be modified by the installer)
The display shows the main programming menu:
Main Menu

1- Codes

2- Parameters
3- Display
4- Telephone Prog
B- Exit
Access code
Código de acceso
_______
Prog. code
Programming Code
_______
******
******
Main Menu
1- Codes
2- Parameters
3- Display
4- Telephone Prog
B- Exit
Pag 21