Monitor Settings - Fermax LOFT COMPACT Manual De Instrucciones

Kit VIDEO MARINE
Kit VIDEO MARINE

MONITOR SETTINGS

To set up the different monitor parameters, it is necessary to access the configuration mode.
To access configuration mode, press the «
second and a confirmation tone is heard.
Call Volume Setting
When in configuration mode, press the
volume.
Call Tone Selection and Call Cancellation
When in configuration mode, press the «
Now, press the
-
Press « » to activate Call Cancellation.
Image Configuration
When in call tone selection mode, press the
seconds, indicating that the monitor is in image configuration mode.
The monitor has 4 preset configurations with a set brightness and contrast level.
«+»
Press the
settings in sequence.
(2 seg.)
Enter
configuration
mode
«+»
button to change the monitor call tone.
-
or « » button to change between the different brightness and contrast
(When the first or last configuration is reached, an alert tone is heard).
» for 2 seconds. The LED blinks once per
«+»
button to select high volume or «
» button again.
button again. The LED blinks once every 2
-
» to select low
Set call volume
Select call tone and call
cancellation
Image configuration
Pag 23